O/W Skin Protection Cream 11.1

Hydrior AG
Phase
Product
INCI Name
Supplier
Volume
A

HYDRIOL® OP.10

(PEG-20 Oleate)

2.5

Caprylic/Capric Triglyceride

Caprylic/Capric Triglyceride)

4.0

Glyceryl Stearate

(Glyceryl Stearate)

7.0

Ecorol® FA 68/50P

(Cetearyl Alcohol)

2.0

Isopropyl myristate

(Isopropyl Myristate)

4.0

Paraffin oil (viscous)

(Paraffinum Liquidum)

6.0

Talcum

(Talc)

5.0

Triethanolamine

Triethanolamine

0.22

B

Urea

Urea

5.0

Carbopol® ETD 2050

(Carbomer)

0.12

Rokonsal® LJ

(Preservative)

0.05

Water

Water

61.9

Perfume

(Parfum)

0.2

Preparation:

Weight in all ingredients for the oil phase and heat up to approx. 80 °C while stirring and add this mixture without stirring into the aqueous phase at 70 - 80 °C. Mix it shortly at 70 °C Homogenize with a rotor/stator system at approx. 10'000 rpm for three minutes and for another minute after cooling down to approx. 25 °C Add the perfume and mix it. Remark: Add Carbopol® after preparation of the aqueous phase during intensive stirring. Degas the mixture with vacuum if possible.

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

NYSCC Suppliers' Day 2026

Javits Center, New York
19 - 20 May

in-cosmetics Korea 2026

COEX, Seoul
1 - 3 July 2026