MASCARA WITH PERMETHYL 284C
Presperse LLC
Deionized Water
Deionzed Water
46.25
Keltrol F
Xanthan Gum
1
0.15
Veegum HV Granules
Magnesium Aluminum Silicate
2
0.55
Dissolve NA-2
Disodium EDTA
3
0.05
Methylparaben
Methylparaben
4
0.30
Triethanolamine, 99%
Triethanolamine
5
0.50
Butylene Glycol
Butylene Glycol
6
1.00
Black Iron Oxide C7133 (50% dispersed in Butylene Glycol)
Iron Oxides (and) Butylene Glycol
7
18.00
Dow Corning 345 Fluid
Cyclomethicone
5
5.00
Dow Corning 5225C Formulation Aid
Cyclopentasiloxane (and) PEG/PPG-18/18 Dimethicone
5
1.00
Beeswax (White)
Beeswax
8.00
Stearic Acid
Stearic Acid
9
2.00
Arlacel 165
Glyceryl Stearate (and) PEG-100 Stearate
10
2.00
Lipocol S
Stearyl Alcohol
9
2.00
Permethyl 284C
Polyisobutene and Mixed Alkanes
11
4.00
Phenoxyethanol
Phenoxyethanol
1.00
Ganex V-220
VP/Eicosane Copolymer
4
4.00
Carnauba Wax #1
Copernicia Cerifera (Carnauba) Wax)
8
4.00
Propylparaben
Propylparaben
4
0.20
Preparation:
Procedure In a suitable kettle, combine the Phase A ingredients one a time. Mix until all are completely dissolve. When Phase A are completely dissolve, heat to 75°C with a propeller mixer. When Phase A reach the temperature of 75°C, add the Phase B Black Iron Oxide disperse in 50% Butylene Glycol. Mix well. In a separate vessel, weigh the Phase C and begin heating to 80° – 85°C. Mix until all the waxes are completely melted and dissolved. When Phase C is at 80° – 85°C and uniform, slowly add to Phase A&B with adequate mixing. Mix for 15 minutes and begin slow cooling. Continue mixing the batch with a good agitation. When batch begins to thicken, switch to side wiper or paddle mixing. Continue cooling to 25°C When batch is at room temperature, stored in appropriate containers.
Notes:
Suppliers 1 Kelco 2 RT Vanderbilt 3 Akzo Noble 4 ISP 5 Dow Chemical 6 Ruger Chemical 7 LCW 8 Ross 9 Lipo Chemicals 10 Uniqema Americas 11 Preperse Inc. 12 Symrise
Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Silverson Machines, Inc.
355 Chestnut St. , East Longmeadow, MA 01028
Phone: 413-525-4825
Fax: 413-525-5804
Silverson Machines
High Shear Mixing Equipment for the Cosmetics and Personal Care Industries
Silverson experts understand the mixing challenges you face in the cosmetics industry, such as reducing production...
NYSCC Suppliers' Day 2026
Javits Center, New York
19 - 20 May
in-cosmetics Korea 2026
COEX, Seoul
1 - 3 July 2026