Light Foundation Cream
Lubrizol Advanced Materials Asia Pacific Limited
This light foundation cream uses Carbopol®* Aqua SF-1 OS polymer in an untreated TiO2 containing emulsion to provide good long term stability (TiO2 suspension and emulsion stabilization), good color rub-in characteristics, uniform distribution of TiO2 particles, and smooth texture with a glossy appearance.
Schercemol™* 318 Ester
Isopropyl Isostearate
Lubrizol Advanced Materials, Inc
5.00
Schercemol™* CO Ester
Cetyl Ethylhexanoate
Lubrizol Advanced Materials, Inc
5.00
Dow Corning 200® Fluid (200 cst.)
Dimethicone
Dow Corning
2.00
Hydrenol® MY
Cetearyl Alcohol
BASF
2.00
Glucate™* SS Emulsifier
Methyl Glucose Sesquistearate
Lubrizol Advanced Materials, Inc
1.00
Sensient® W-877
Titanium Dioxide
LCW
8.00
Iron Oxide Yellow 34-PC-3170 0
Yellow Iron Oxide
Emerald Hilton Davis
0.60
Iron Oxide Red 34-PC-3511
Red Iron Oxide
Emerald Hilton Davis
0.20
Propylene Glycol
3.60
Butylene Glycol
2.40
Glucamate™* SSE-20 Emulsifier
PEG-20 Methyl Glucose Sesquistearate
Lubrizol Advanced Materials, Inc
1.80
Deionized Water
64.00
Carbopol®* Aqua SF-1 OS Polymer
Acrylates Copolymer (30%)
Lubrizol Advanced Materials, Inc
3.00
Triethanolamine (99%)
0.90
Butylcarbamate, Glydant Plus®
DMDM Hydantoin and Iodopropynyl Butylcarbamate
Lonza
0.30
Preparation:
- PART A: Mix PART A ingredients, heat to 75°C.
- PART B: Mill pigments (ingredient 6, 7, and 8) in propylene and butylene glycol, mix until homogenous.
- PART C: Mix Glucate™* SSE-20 emulsifier with water and heat to 50°C.
- With continuous mixing, slowly add PART B into PART C. Heat to 75°C.
- Add PART A to main batch with good agitation and continue mixing until homogenous. Maintain temperature of 75°C, homogenize at 3,000 rpm for several minutes (by Silverson homogenizer).
- Cool batch to 60-70°C, add Carbopol®* Aqua SF-1 OS polymer with agitation. Mix until uniform.
- Cool batch to 50-60°C, neutralize with Triethanolamine to pH of 6.8-7.0.
- Cool batch to less than 40°C, add ingredient 15 (preservative), mix until uniform.
Notes:
Schercemol™* CO ester provides a light, non-oily feel which transitions nicely into the slightly more substantive but still non-greasy aesthetics of Schercemol™* 318 ester. Glucate™* SS emulsifier’s sesquistearate chemistry helps in reducing tackiness and gloss and gives a drier afterfeel.
Product Properties: Appearance Creamy flesh-colored emulsion pH 6.8 – 7.0 Viscosity (mPa·s)*** 25,000 – 35,000 Stability: Passed 3 months @ 45°C, 5 cycles freeze / thaw Carbopol®
- Aqua SF-1 OS Polymer Actives (wt.%) 0.9 %
*** Brookfield RVT or DV-II @ 20 rpm, #7 spindle @ 25°C, measured after 24 hours
Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Nagase Viita -Where beauty and biotechnology thrive
With a deep insight into biotechnology and science, Nagase Viita develops unique functional saccharides and saccharide-based active ingredients utilizing enzymes and fermentation through sustainable manufacturing.
Followed by 140 years of history for exploring glycoscience...
NYSCC Suppliers' Day 2026
Javits Center, New York
19 - 20 May
in-cosmetics Korea 2026
COEX, Seoul
1 - 3 July 2026