Broad Spectrum SPF ~75, PFA (PPD) ~20 Water Resistant (Four Hours) Sunscreen Lotion JZ5-221
Hallstar
A water-in-oil (W/O), very-high-protection sunscreen emulsion four-hour water performance and SPF 50+. The extremely rapid and highly efficient singlet-state-quencher, SolaStay® S1, photostabilizes Ethylhexyl Methoxycinnamate (Octinoxate) and Butyl Methoxydibenzoylmethane (Avobenzone). SPF determined in vivo (10 subjects) on closely related J097-8. Critical wavelength = 376 nm
Water (aqua) (deionized)
41.10
Propylene Glycol USP1
Propylene Glycol
3.00
Versene™ NA1
Disodium EDTA
0.10
Rhodicare® XC2
Xanthan Gum
0.15
CoSept™ PEP3
Phenoxyethanol, Methylparaben, Ethylparaben, Butylparaben, Propylparaben, Isobutylparaben
0.60
Uvinul® MC804
Ethylhexyl Methoxycinnamate [Octinoxate]
6.00
Finsolv® TN5
C12-15 Alkyl Benzoate
10.00
Crodamol™ PTIS-LQ-(MH)6
Pentaerythrityl Tetraisostearate
5.00
HallStar® OP3
Ethylhexyl Palmitate
5.00
SolaStay® S13
Ethylhexyl Methoxycrylene
5.00
Parsol® 17897
Butyl Methoxydibenzoylmethane [Avobenzone]
5.00
Neo Heliopan® BB8
Benzophenone-3 [Oxybenzone]
6.00
HallStar® GMO3
Glyceryl Oleate
1.00
N.F. White Beeswax Wax # 421P9
Beeswax
1.50
Performalene™ 40010
Polyethylene
1.50
RTD™ Stearic Acid V-16553
Stearic Acid
0.20
Dehyrnuls® LE4
PEG-30 Dipolyhydroxystearate
3.00
Danox® 30011
BHA
0.10
Eusolex® T-AVO12
Titanium Dioxide, Silica
3.75
Sodium Chloride ACS13
Sodium Chloride
2.00
Preparation:
Water phase: Combine A in the main vessel. Add B and mix until totally dissolved. Disperse C and mix until uniform and lump free. Start heating to 70°–75°C and add D. Oil phase: In a separate vessel, combine E and start mixing. Add F and heat to 70°–75°C. Add phase G ingredients in order and continue mixing until uniform and molten. Disperse H and mix until uniform. When both phases are at least 70°C, slowly add the water phase to the oil phase and mix until uniform. Homogenize for 5 minutes. Continue mixing using an overhead stirrer while allowing batch to cool. Add I with mixing. Replace any water lost to evaporation. Mix until smooth and at desired filling temperature. Perform final quality assurance checks and package product.
Notes:
1 Dow Chemical 2 Solvay/Rhodia Novecare 3 HallStar 4 BASF 5 Innospec 6 Croda 7 DSM Nutritional 8 Symrise 9 Koster Keunen, LLC 10 New Phase Technology 11 Kao Chemicals 12 EMD 13 Sigma
PRODUCT PROPERTIES Viscosity (RV, T-D, 5, 20 & 100 rpm; cP): 9600, 6100 & 3350 Appearance: Off white lotion pH: 4.5
Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
De Monchy: Connecting Industries Since 1851
Since 1851, De Monchy has connected leading producers with industries worldwide, distributing high-quality raw materials across coatings & adhesives, additives, waxes, food & personal care ingredients, and engineering plastics. With deep market knowledge and a global network, we provide tailored...
NYSCC Suppliers' Day 2026
Javits Center, New York
19 - 20 May
in-cosmetics Korea 2026
COEX, Seoul
1 - 3 July 2026